How To Make A Recliner More Comfortable

There’s no question that when you are looking for comfort, you need to sit on a recliner. After all, a recliner delivers a great way to relax after a long day at work or even during a break. However, sometimes, you may feel that your recliner could be even more comfortable. So, how to make a recliner more comfortable?

Discover the best office chairs in 2020.

The truth is that when you are looking at how to make a recliner more comfortable, the best thing you can do is to take a closer look at the adjustments. 

How To Make A Recliner More Comfortable

#1: Changing The Recliner Pitch:

The first thing you need to do is to sit in your recliner in the upright position. Just make sure that your back is against the backrest without reclining. And now, it’s the time to determine the recliner pitch to get the ultimate comfort. 

Simply put, the recliner pitch is simply the height of the chair front when the recliner is in its closed, upward position. You can usually adjust the pitch by altering the appropriate bolts at the bottom of the chair.

The truth is that when your recliner pitch is too low, you will notice that your knees bend above the seat and upward the seat when you are sitting down. On the other hand, when your recliner pitch is too high, you won’t be able to touch the ground with both your feet. In either case, you should adjust the recliner pitch. 

In order to do so, the first thing you need to do is to simply keep your back in an upright position and have your legs rest closed. Then, just lean the entire recliner forward so you can expose the underside of the chair. You will now need to look for the cam bolts in place. In most cases, you should find them toward the center bottom of the chair. 

Check out the best zero gravity recliner office chairs. 

It is worth to note that these aren’t the same bolts of the recliner tension feature. 

Now, you should loosen these cam bots using the right wrench on either side of the bottom mechanism. Notice that the point is to loosen them a bit and not completely. Just give them enough room to wiggle the chair around. 

At this point, you should use a cordless power ratchet or a wrench to completely remove the two cam bolts that are at the front of the bottom mechanism. 

So, now it’s the time to adjust the frame. You will need to move the front of the frame either up or down to ensure that you can adjust its position. This is what will allow you to adjust your recliner pitch. One of the things that you should keep in mind is that even minor adjustments can make a huge difference in the pitch of the recliner. So, you should definitely try to work in small increments to ensure that you get to the right recliner pitch. 

Now that you already have the cam as you want, it is time to insert the front bolts back into the bottom frame. As soon as you have them well-positioned, just use the power ratchet or the wrench again to tighten them securely in place. At this point, if you try to wiggle the bottom mechanism, it should be firm and stationery, In case it’s not, you need to recheck the bolts and tighten them more. 

Now it’s finally the time to test your recliner pitch. So, just return the chair to its upright position and sit down. You should now have your kneed bent at an approximate exact angle and your foot should be flat on the ground. 

These are the best zero gravity full body massage chairs.

#2: Adjusting Recliner Tension

Another thing that you can try is to adjust the recliner tension so that you make it more comfortable. 

Notice that the recliner tension simply refers to how your backrest lens backward. So, you should sit in your recliner and lean back against the backrest. In case this is something that is difficult for you to do, this means that you need to decrease the recliner tension. 

So, to get started, you need to tilt the recliner forward. Just make sure that the back of the chair is in the upright position and that the footrest is closed. This should allow you to expose the underside of the recliner. Just rest the chair on its armrests so you can work on the recliner tension. 

The first thing that you will need to do is to look for the adjustment mechanism. One of the things that tend to be common to recliners with adjustable recliner tension is that they usually have a pair of wing nuts or thumb wheels beneath the seat. You should be able to see one at the right and the other one at the left at the end of a bolt. Besides, the tension springs should be connected to the same bolt from the other side. Now that you see the mechanism, you will need to turn the thumbwheels or wing nuts clockwise to increase the reclining tension. In case you want to decrease the tension, you need to turn them counterclockwise. You should try this step using your fingers. However, in case it’s too tight, you can use pliers instead. Again, it’s a good idea to work in small increments.

Discover the best reclining office chairs.

It’s now the tome to test the adjustment you just made to your recliner. So, just place it back in the upright position and sit in the chair. Make sure that the recliner tension is working by extending the leg rest out and leaning back in the chair.

Bottom Line

As you can see, it’s not difficult to make your recliner even more comfortable. The truth is that sometimes, you just need to make a small adjustment to get all t