How To Get Mold Out Of Office Chair Fabric

While you may have already thought about cleaning your office chair, the truth is that most people don’t even remember that mold can start attacking your office chair.

As you probably know, mold is a fungus that can grow almost anywhere. And this includes your office chair. While it can cause severe health problems, it can also deteriorate your office chair fairly quickly. This is why you need to act immediately as soon as you notice that you have mold on your office chair fabric.

Choose the best office chair for you.

One of the things that you need to know beforehand is that in order to get rid of the mold, you will need not only to remove it from your office chair fabric as well as you’ll also need to prevent it from building up again through moisture. One of the things you can do to prevent it from appearing is to make sure that your office chair is in an aired room.

Here’s what you need to remove the mold out of your office chair fabric:

• glover
• pants and long sleeves
• respirator or mask
• vacuum with a filter
• broom
• water
• rubbing alcohol
• white vinegar

Step #1: Preparing Yourself:

Make sure that you put on the pants and long sleeves as well as the gloves. While it’s not mandatory, we advise you to wear a mask or respiratory to ensure that you don’t accidentally inhale the mold spores.

Step #2: Take The Office Chair Outside:

As you probably know, one of the main reasons for the mold to appear is moisture. So, if you take your office chair and put it outdoors and set it in direct sunlight, you will be killing the mold. As an extra benefit, you will also be preventing the mold to spread out throughout your entire home.

Take a look at the best zero gravity office chairs.

Step #3: Using The Broom:

The next step is to take the broom and sweep the mold that you see off of the fabric. Make sure that you just sweep these specific areas or you may be spreading the mold spores to additional areas of your office chair.

Step #4: Vacuuming:

After brooming, you can vacuum the upholstery but only if your vacuum includes a filter. If it doesn’t, just don’t use it because you may end up sending the mold spores back to the air and back to your office chair again.

Step #5: When There Is A Lot Of Mold:

When you see that your office chair is filled with mold, you will need to mix a mild soap or detergent in water and make lots of suds. Then, just use a cloth to wipe the suds onto the fabric and rub them into it. Afterwards, you just need to use a clean damp cloth to wipe the area.

Step #6: Leave It Outside:

Whether or not you need step 5, you need to make sure that your office chair doesn’t have any moisture anymore. So, just leave it in the sun for several hours.

Step #7: Couple Extra Solutions:

While for most fabric office chairs, you should have the mold removed by now, in case you weren’t able to remove it all or if you still notice an odd smell, you can then use a solution of equal amounts of vinegar and water or a solution of equal parts of rubbing alcohol and water.